★★★★★ 5.0 on Google · 125 reviews · 250+ five-star reviews across all platforms · 1,500+ kitchens revived since 2012
Fulton Revivals Logo
Now Offering: Interior Painting & Exterior Painting

Oak Brook · Chicagoland

Cabinet Refinishing in Oak Brook

Cabinet refinishing for Oak Brook's high-end walnut, cherry, and oak estate cabinetry. Restore the natural grain or revive with a new stain, finished in-house. Get your estimate.

EPA Lead-SafeCertified Firm
Licensed & InsuredYour home protected
5.0 on Google125+ reviews
250+ Five-Staracross all platforms
Est. 2012Founder-led

Love the look of real wood? On Oak Brook's high-end cabinetry, we restore the grain to its natural richness.

Founder-led since 2012, Fulton Revivals refinishes the genuinely good hardwood common in Oak Brook's estate kitchens. Walnut, cherry, and quarter-sawn oak brought back so the wood reads warm and intentional again. Choose Refresh to restore the existing finish, or Revive for a whole new stain.

Restoring real wood in Oak Brook's estate kitchens

Not every kitchen wants to be painted. Some of the cabinetry in Oak Brook is genuinely beautiful hardwood, walnut, cherry, mahogany, quarter-sawn oak, the kind of wood that went into these estate homes when they were built in the 1970s, 80s, and 90s and was never the cheap part of the house. When the grain itself is the thing you love, painting over it would be a loss. Refinishing is how you keep the wood and lose the years.

Here is what time does to even the best cabinetry. A clear finish ambers and yellows. Cherry shifts orange and goes muddy. The high-touch points by the sink and the range wear thin and dull. The wood underneath is still rich and full of figure, but the finish sitting on top of it has clouded over and is showing its time. Refinishing strips that tired layer back and brings the grain forward again, so a walnut run reads deep and warm instead of dark and dead, and a cherry kitchen looks intentional rather than simply old.

We work two ways here. Refresh restores the existing finish: same wood, same tone, but clarified and renewed back to factory-smooth, ideal when you still love the color and just want the richness back. Revive takes the wood to a new stain entirely, a way to bring a dated orange-cherry or yellowed oak into a current tone without giving up real wood for paint. For the Oak Brook homeowner who specifically did not want a painted kitchen, this is the service that was missing.

How a refinishing project goes in Oak Brook

It starts with a Cabinet Design Consultation. We come to you, look at the actual wood under good light to confirm it is a strong refinishing candidate, which the high-end hardwood in these estates usually is, and bring stain samples to your island so you can judge a tone against your own floors and stone rather than from a fan deck.

When the work begins, we encapsulate the kitchen in a plastic bubble and run a negative pressure machine that vents outside, so stripping and refinishing never sends dust or smell through a home this size. Doors and drawer fronts come back to our controlled Pilsen shop, where we strip the old finish, bring the grain back, and build our coats very thin and in multiple coats for a clear, even, factory-smooth result that lays down flat and lets the wood show. Boxes are handled on site to match. Because we finish everything ourselves, boxes and all, the whole kitchen reads as one continuous piece of wood rather than a patchwork of tones.

Every project is backed by the Fulton Revivals warranty, start to finish.

Link: See our full cabinet refinishing process → /services/cabinet-refinishing/process/
Link: About cabinet refinishing → /services/cabinet-refinishing/

In their own words


What homeowners say after the reveal

★★★★★

Joe the owner is a pleasure to work with. The quoting process is meticulous and he helped me devise solutions and help me update the condo's look while keeping costs reasonable. Any issues from walkthrough is quickly addressed and Brayan from Joe's crew did a good job painting the various parts of the apartment. Will definitely work with them again and recommend Fulton Revival to anyone looking at painting jobs. Give them a call!

Jenny T.
Interior Painting · Evanston
★★★★★

Joe and his team at Fulton Revivals were excellent and we are extremely pleased with the interior paint work done throughout our condo. They were professional and timely - communicating to us throughout the project. Joe had the team out quickly after project completion to address minor touch-ups post walk-through. Highly recommend and will utilize Fulton Revivals services for future work.

Carol H.
Interior Painting · Brookfield
★★★★★

We recently had our kitchen cabinets refinished by Fulton Revivals. Working with Joe and Krystal was amazing and we couldn’t be happier with the results! They were professional, reliable, and went above and beyond to make sure everything was perfect. Our cabinets look absolutely beautiful — it’s like we have a brand new kitchen! Their attention to detail and pride in their work truly show. We highly recommend them to anyone looking for quality craftsmanship and outstanding service.

Margaret P.
Cabinet Refinishing · Deerfield

Oak Brook questions


Questions we hear most

What is cabinet refinishing?
Refinishing restores your existing real-wood cabinets without replacing or painting over them. We take the doors and drawer fronts to our shop, sand back the old finish, and apply new stain and clear coats, doing the boxes to match, so your natural grain stays visible and looks new again. Sometimes it's even simpler. We scuff up the existing finish and lay on fresh clear coats so the cabinets look brand new again. Which approach we take depends on your goals and what's happening with each individual cabinet set.
How much does cabinet refinishing cost?
Cabinet refinishing typically runs $150 to $250 per door and drawer front, similar to painting. Where you land depends on the size of your kitchen, the condition of the existing finish, the type of wood, and whether you're restoring the current color or changing the stain. We price every job off our production rates so the number reflects your actual cabinets. For a full breakdown, see our cost guide.
Refinishing vs. painting: what's the difference?
Painting applies an opaque, solid-color finish that covers the wood completely, so the grain no longer shows. Refinishing keeps your real wood visible, sanding back the old finish and re-staining so the natural grain comes through. Choose painting for a clean, modern color, and refinishing when the wood itself is something you want to keep and show off.
Can you change the stain color of my cabinets?
Yes. Restaining to a new color is our Revive path, and going darker or to a similar tone is straightforward. Going significantly lighter is much harder, because even with heavy sanding we can't pull every bit of old stain out of the grain and corners, so we'll be honest up front about the shade that's realistically achievable on your wood.
Can you just fix or restore my worn finish without changing the color?
Yes. That's our Refresh path. When the wood and color are still what you want and it's just the clear coat that's worn, scuffed, or peeling around the handles and high-touch areas, we scuff the existing finish and lay on fresh clear coats so everything looks new again without a full re-stain. It's the lightest-touch way to bring tired wood cabinets back to life.
What types of wood can you refinish?
We refinish maple, oak, birch, alder, poplar, and hickory, the woods most kitchen cabinets are built from. Oak takes stain beautifully, maple is more particular and we plan for that, and we'll always give you an honest read on how your specific wood will respond before we start. Veneer and laminate aren't real wood, so those are a painting or refacing conversation instead.
Will refinishing keep the natural wood grain?
Yes, that's the whole point of refinishing. Unlike paint, which covers the wood with a solid color, refinishing sands back the old finish and re-stains so your natural grain stays visible and even comes through richer. If you love that your cabinets are real wood and want them to still read as real wood, refinishing is the path that protects it.
How long does cabinet refinishing take?
About 5 to 10 working days, similar to painting. We take the doors and drawer fronts to our shop to sand, stain, and clear-coat them, work the boxes on-site, then return to reinstall. Refinishing can take a touch longer than a straight repaint when the old finish is heavy or we're shifting the stain color, because the sanding and color steps are slower.
Is refinishing better than painting for wood cabinets?
Neither is better, they solve different goals. Refinishing is the right call when you love that your cabinets are real wood and want to keep that look, restoring and re-staining the grain. Painting is better when you want a clean, modern color the wood can't give you, like a crisp white or deep navy. We'll walk you through both at your consultation and tell you straight which fits what you're after.
Can you refinish oak cabinets so they look modern instead of orange?
Yes, and it's one of our most requested transformations. That orange or golden cast on older oak comes from a dated stain and finish, not the wood itself. By sanding back the old finish and re-staining in a current tone, we can take honey or golden oak to a warm modern brown, a richer espresso, or a more natural look, while keeping the real wood grain you already have.
Will refinishing fix the worn, peeling clear coat around my handles?
Yes, that's a classic Refresh-path job. When the wood and color are still good and it's just the clear coat that's worn or peeling at the high-touch spots around handles and edges, we scuff the existing finish and apply fresh clear coats so it looks new again, without a full re-stain. It's the lightest, most efficient way to bring a tired finish back.
How long does a refinished stain finish last compared to paint?
Both are built to last for years of daily use when done properly. A quality stain-and-clear-coat finish stands up well to kitchen wear, and like any finish its life comes down to the prep and the coatings underneath, which is where we don't cut corners. The honest deciding factor between the two usually isn't longevity, it's the look you want: real wood grain versus solid color.
Can you refinish my cabinets without filling my house with sanding dust?
Yes. We use HEPA dust-extraction sanders that capture dust right at the source, and the heavy sanding happens at our shop, not in your kitchen. On-site, we run a negative-pressure machine that keeps your home airtight, sealing the work area and venting outside so dust and odor stay out of the rest of the house. We also avoid chemical strippers wherever possible, since they're high-odor and off-gas in your home for weeks. Sanding the right way is better for your house, our crew, and the result.
Can you match a new stain to my existing wood floors or furniture?
We can get a strong match as long as we have something real to work from. We'd need a sample of the stain or an actual piece of the wood, and the surface we're matching has to be real wood, not laminate or a printed look. With an actual sample in hand we test stains on your cabinets and dial in a tone that complements your floors or furniture intentionally. Stain reads differently across wood species, so we'll set honest expectations on how close a true match is achievable for your specific woods.
Do you refinish bathroom vanities and other built-ins too, or only kitchens?
Both, and built-ins are some of our favorite work. We refinish bathroom vanities, office built-ins, bars, mudrooms, and fireplace surrounds. It makes the most financial sense paired with a kitchen project, where we're already set up, but whole-home refinishing where we tie all your wood together is exactly the kind of project we love.

Ready when you are

Ready to start your Oak Brook project?

CallTextGet Your Estimate